The EagleEyesTM FPV Station integrates four of the main components you need for FPV on the ground, at a cost that's lower than many of the individual components presently available!
Receiver Diversity...
When you connect two NTSC or PAL audio/video receivers (of any frequency), the EagleEyesTM picks the better signal at any given time, which can greatly reduce video fades and improve your FPV experience! A variety of diversity settings are configurable with the on-board switches and LED indicators.
Antenna Tracking...
when coupled with our OSD Pro, the EagleEyesTM is the heart of a full-featured pan/tilt antenna tracker. Powerful, easy to use menus are provided for adjusting the EagleEyesTM to work flawlessly with the tracker of your choice. An exclusive to Eagle Tree, multiple pan points can be calibrated, resulting in greater panning accuracy even if your pan servos are somewhat nonlinear. The built-in regulator drives even large pan/tilt servos, with no need for an external BEC.
Telemetry...
When coupled with our OSD Pro, all Eagle Tree data (not just GPS position) are transmitted to your laptop, via your video transmitter and the EagleEyesTM USB port (separate USB cable required). Your flight can then be graphed and displayed with our powerful software, or visualized (either in real time or after your flight) with Google Earth!
Four Channel A/V Distribution...
Ever wish you had more video/audio outputs? The EagleEyesTM has four built-in outputs!
Programmable Low Voltage Alarm...
How is your ground station battery doing? Now you can program a low voltage alarm buzzer, which alerts you when your battery is below your chosen voltage. The buzzer can also be programmed to alert for other conditions, such as poor telemetry signal.
Specifications:
Video Format: PAL / NTSC
Using your video receivers of any frequency. Video Input 2 is adjustable to match Video Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.
Two audio inputs: Two monaural audio inputs are supported
Audio Input 2 is adjustable to match Audio Input 1. Note that only one input needs to be used, if you are not using the Diversity feature.
Four A/V outputs: Four Video outputs and four audio line outputs.
Four video outputs (75 ohm) and four "line level" audio outputs.
Power Input: Power input range approximately 6V to 14V
Barrel style power input with
standard 2mm center pin.
Servo Outputs: 5A output for pan and tilt trackers
Unit is capabable of delivering 5A burst output to drive even large pan/tilt servos.
USB Port: PC connectivity supported
USB Port for connecting to PC, for live PC display of telemetry and firmware update.
Note: A standard USB "Mini-B" cable is required for these features, but not included.
Encasement: The EagleEyes board is protected by heavy duty, clear heatshrink
The EagleEyes does not include a plastic case at this time. A clear plastic case is planned for future release, and that should be compatibile with existing units. The case will be available for separate purchase.
